Enjeksiyon kalıplama makinesi için hidrolik yağı seçmek için üç kriter!

Enjeksiyonlu kalıp makinasıbir plastik işleme sürecidir, polimer işleme çok fazla enerji tüketecektir ve ayrıca soğutma cihazında, hava sıkıştırmasında ve diğer bağlantılarda büyük miktarda enerji tüketimi üretilecektir. Böyle büyük bir enerji tüketimi olan enjeksiyon kalıplama makinesi doğal olarak hidrolik yağ gerektirecektir. Çok yüksek standartlarda ürettik, peki enjeksiyon kalıplama makinesinin hidrolik yağı nasıl seçilir? Referans için üç ana standart vardır!

Hidrolik yağı seçme kriterlerinden birienjeksiyonlu kalıp makinası: uygun viskozite ve sıcaklığa sahip hidrolik yağı seçin. Çalışmadaki hidrolik yağın viskozite gereksinimleri  temperature and starting temperature of the enjeksiyonlu kalıp makinası are related to the fluidity of the hydraulic action of the enjeksiyonlu kalıp makinası and the accuracy of the transmission, which directly affects the working efficiency of the enjeksiyonlu kalıp makinası. Therefore, the hydraulic oil selection of the enjeksiyonlu kalıp makinası should consider the viscosity and stability. Whether the performance meets the requirements of the production work, if it does not meet the requirements, it should be replaced in time. At the same time, according to different external environmental temperatures, it is also necessary to appropriately select the appropriate hydraulic oil.

Hidrolik yağı seçmek için ikinci kriterenjeksiyonlu kalıp makinası: anti-wear hydraulic oil. Generally, under high-pressure work, it will increase the friction during work. Therefore, anti-wear hydraulic oil is a hard requirement. It can not only reduce friction on enjeksiyonlu kalıp makinasıs. The damage can also improve work efficiency. At the same time, this hydraulic oil also has anti-rust and anti-oxidation effects. The anti-wear hydraulic oil that is given priority for enjeksiyonlu kalıp makinasıs is generally No. 46 or No. 68.

Hidrolik yağı seçmek için üçüncü kriterenjeksiyonlu kalıp makinası: the shear stability of the hydraulic oil. In the production process, the hydraulic oil will be severely sheared when passing through the micro-holes of the pump and valve. At this time, the performance and effect of the hydraulic oil will be damaged. Therefore, when the hydraulic oil is selected, the resistance to the hydraulic oil is Shearing capacity must have a high-demand selection standard, which has a good protective effect on maintaining the functionality of the enjeksiyonlu kalıp makinası.

There are standards for selecting hydraulic oil, and there must be standards during the use of hydraulic oil. Some hydraulic oils have a reduced efficiency after being used for a period of time, so they must be replaced in time. The blackening of the hydraulic oil or the presence of some impurities in the hydraulic oil is to remind us that there has been a problem with the hydraulic oil. We must pay attention to timely supplement and replacement of the hydraulic oil. This is not only for the maintenance of the enjeksiyonlu kalıp makinası, but also saves time and electricity. , An effective guarantee for work.